Standard Operating Procedure for Mini Excavator Brush Cutter，make sure that the mini-excavator is in the shutdown state, remove the bucket or the original accessories, and clean up the sundries and oil stains at the connection part.Align the connecting interface of the mini-excavator mower with the small arm pin of the excavator, insert the fixing pin and lock the safety buckle to ensure that the connection is firm and not loose.Adjust the blade speed according to the weed type, to medium speed (1800-2200 rpm) when cutting low weeds, and to high speed (2500-2800 rpm) when cutting shrubs or thick stem weeds.Adjust the forearm angle of the excavator so that the blade of the mini-excavator mower is at an angle of 15-30 ° to the working surface to ensure uniform cutting depth.Set the safe operation scope, confirm that there are no personnel, stones, metals and other obstacles in the operation area, and clean up large debris in advance.
28
Aug
28
Aug
28
Aug
28
Aug
In the past, all the weeds in the orchard were cut by hand, and five mu of land needed three people to work for two days.Since I bought this small excavator mower, it can clean up the weeds in the whole garden in half a day on my 3 tons of small excavator.Blade is particularly sharp, even half a centimeter thick miscellaneous branches can be cut directly, after cutting the ground is very flat, no longer need to bend down to pick up weeds, a year down to save labor costs enough to buy equipment.
It has always been a difficult problem to clear weeds on the slopes on both sides of municipal roads, and it is slow and dangerous to climb the slopes manually.After using this small excavator mower, the small excavator can stretch its arm to clean the slope when it stops at the roadside. The angle adjustment is flexible, and the 3-meter-high slope can be easily cut.The equipment is very durable, continuous operation for half a month, blade wear is very slight, now we have six maintenance groups equipped, the efficiency has increased by at least 10 times.
The cooperative has 200 mu of paddy fields, and the weeds in the ridges and ditches take a lot of effort every year.This mower is installed on my small excavator just right, the weeds beside the ridge and ditch are cut clean, the blade speed is stable, and it will not turn up the soil and hurt the roots of crops.In the past, it took two days to hire people to cut 10 mu of ridges, but now it takes one day to cut 30 mu with equipment, and there is no need to bend down to clean up, which is too labor-saving, and the farmers of the cooperative feel that it is worth it.
Weeds grow fast on both sides of the footpath and hillside lawns in the scenic area, and the untidy cutting with sickles also affects the landscape.This small excavator mower solves the big problem. It not only cuts fast, but also adjusts the height through the excavator, so that the weeds keep a uniform height and look very regular.Equipment noise is low, will not disturb tourists, the fuselage is easy to clean, used for more than half a year without any failure, the maintenance cost of scenic spots has been reduced a lot.
EN
